Power Supply (X3-R)

From Garaventapedia

The power for the motor is delivered by 2 batteries (12 VDC, 7.2 Ah), which are placed in a container behind the hanger. These batteries get charged every time the lift enters the upper or lower landing. The mains power requirement for the charger is 208 to 240VAC, single phase. The charger is equipped with a “Euro-plug” and supplies 2 amps charging current to the unit.

In case the unit is left outside the landings an audio signal will start to notify the owner of its location after 2 minutes. If the voltage drops under 18 Volts a low Voltage buzzer will sound and the user will have to drive the unit to the lower landing. A lockable supplementary mains disconnect switch is mounted between the batteries.