What is your accessibility challenge? Let us help.

Call Garaventa Lift now 1.800.663.6556

Genesis Leadscrew and Hydraulic Drive Systems

There are two drive systems available for the Genesis Enclosure. Listed below are the main features of each drive system.

leadscrew drive system

Leadscrew Drive System

Hydraulic Drive System

Hydraulic Drive System

bullet point Driven by a single-phase 2 HP motor attached to a 1" ACME screw
bullet point Powered by building mains power converted to 24 VDC (standard)
bullet point Platform travels between landings at 3 meters (10 ft) per minute
bullet point Six Lifting Heights up to a maximum of 3734mm (147") - floor mounted
bullet point Manual Emergency Lowering Handwheel (standard)
bullet point Battery Powered Emergency Lowering (optional)
bullet point Electrical Disconnect (optional)
Mains Power Requirement:
bullet point North America - 120 VAC single phase on a dedicated 20 amp circuit.
bullet point International - 208-240 VAC single phase on dedicated 16 amp circuit
bullet point Driven by a single-phase 3 HP hydraulic motor
bullet point Powered by continuous mains power with auxiliary power system (standard)
bullet point Platform travels between landings at 5.2 meters (17 ft) per minute
bullet point Seven Lifting Heights up to a maximum of 4343mm (171") - floor mounted
bullet point Manual Emergency Lowering
(standard)
bullet point Full time battery operation (optional)
bullet point Mast Heater (optional)
bullet point Remote Drive Cabinet (optional)
bullet point Electrical Disconnect (optional)
Mains Power Requirement:
bullet point North America - 120 VAC single phase on a dedicated 15 amp circuit.
bullet point International - 208-240 VAC on a dedicated 16 amp circuit