OVERVIEW  |  DRIVE SYSTEMS  |  LIFTING HEIGHT  |  FOOTPRINT/DIMENSIONS  |  PLATFORM SIZES  |  DOORS  |  CONTROLS  |  FINISHES |  OPTIONS

Garaventa Lift Home > Architect Resources > Vertical Platform Wheelchair Lifts > Genesis Enclosure Model > Lifting Heights

Genesis Enclosure Lifting Heights and Mast Sizes

The Genesis Enclosure mast or shroud size required for a particular site is determined by the vertical travel required between the upper and lower landings. When the site is measured, the lift height “H” is always defined as the distance from the lower mounting surface of the lift to the finished floor of the upper landing as shown in the diagram below. If the lift is to be mounted directly on the floor of the lower landing and an entry ramp is used, then "H" equals the elevation change between the upper and lower landings. If the lift is pit mounted, then the measurement "H" is 76mm (3") greater than the elevation change between landings.

Mast Size	Maximum Lifting Height	Leadscrew	Hydraulic
GVL-42	1143mm (45")	X	X
GVL-60	1600mm (63")	X	X
GVL-72	1905mm (75")	X	X
GVL-96	2515mm (99")	X	X
GVL-120	3124mm (123")	X	X
GVL-144	3734mm (147")	X	X
GVL-168 (hydraulic drive only)	4343mm (171")	N/A	X

- Lifting height = distance between upper landing & lower landing mounting surface (pit or floor)

For more information, please download the Genesis Design and Planning Guide or contact your local authorized Garaventa dealer.

  Inclined Platform Lifts
  Vertical Platform Lifts
    Elvoron CPL
    Genesis Enclosure
    Genesis Shaftway
    Genesis OPAL
    Genesis STAAGE
  Home Elevators
  LU/LA Elevators
  Portable Lifts
  Evacuation Chairs

Genesis Enclosure Resources

	CAD BLOCKS     Metric     Imperial
	LOADING DIAGRAM
	SPECIFICATIONS
	PLANNING GUIDE
	PHOTOS
	BROCHURE
	COMPARISON CHART

Contact Us

Back to Garaventa Lift
Main Web Site